Oily and dirty environments are no longer a problem due to the use of our systems. With this we also remove the risks associated with the smooth floors and significantly increase the hygiene of the room.
ATP Cleaning Validation
With the outbreak of the Coronavirus Covid-19, ensuring cleaning is done to the highest possible standards has become crucial. Hygiena’s ATP Cleaning Validation system
Instantly demonstrate the effectiveness of your cleaning on the spot to ensure areas have been properly sanitised. Hygiena ATP measurement technology evaluates the cleanliness of a surface and presents a relative numerical value representing the contamination present on a surface.
EnSURE™ Touch is an advanced monitoring system that collects, analyzes and reports data from a variety of long-trusted quality tests, providing rapid and accurate sanitation verification data.
EnSURE™ Touch features a 5-inch touch screen, wireless sync technology, and cloud-based software. EnSURE™ Touch is designed to adapt to your workplace, providing the data you need for complex multi-location supply chain monitoring and risk management.
The SystemSURE Plus is designed for fast and convenient ATP tests. Its compact durable design and splash proof keypad guarantees the system will perform in all environments. The intuitive simple interface provides straight forward sample evaluation.
Featuring robust technology and industry-leading ease of use, SystemSURE Plus meets the demands of the largest and smallest companies around the world.
Effective weapons in the cleaning battle against the spread of viruses and bacteria, including the Coronavirus COVID-19.
The systems are up to 80 times more effective at moving contaminants than traditional cleaning with cloths, mops and microfiber. We do not just say that, it is also scientifically substantiated.
Kaivac’s is a innovative producer of scientifically tested cleaning systems for restrooms, floors and more. Kaivac systems are fully equipped to fight the spread of bacteria, diseases and contaminants. These systems have been used since 1998 for cleaning hospitals, airports, schools, universities, public transport, restaurants, kitchens and many more public and commercial spaces.
Whether cleaning a toilet, kitchen, classroom or operating room, the goal should be to remove the maximum amount of dirt, both visible and invisible.
We can then test how effectively the area has been cleaned with quick ATP hygiene measurement technology.
Kaivac’s scientifically tested No-Touch Cleaning® system has been developed to remove the maximum amount of dirt and to disinfect all washable surfaces in public areas (toilets, waiting rooms, corridors, commercial kitchens, changing rooms and more).
The No-Touch Cleaning® systems also ensure that employees can work more hygienically and more easily without having to come into contact with contaminants. The capacity of the systems is 700 to 1,000 cubic meters per hour.
How do you disinfect with Kaivac's No Touch Cleaning?
Fill the solution tank with water and connect the disinfectant bottle to the chemical injector. The system automatically dilutes the chemical to the desired concentration.
Apply chemical to the area to be disinfected using the low pressure function on the spray gun.
3. Dwell Time
Allow the chemical to disinfect the surface for a few minutes (as advised by the disinfectant manufacturer).
4. Wash Down
Rinse the surface with clean water using the high-pressure function (500 PSI).
Remove the dirt and contaminants that has been washed to the floor using the powerful wet vacuum.
Contaminated water from the waste water tank can be drained into an appropriate disposal place using the drain hose.
Kaivac’s OmniFlex system helps battle the spread of bacteria and viruses, like Covid-19, by effectively removing contaminants rather than spreading them. The OmniFlex range is modular and adapts to your cleaning needs in both small and large spaces.
An automated high performance floor cleaning machine that’s three-four times faster than a mop, but instead of spreading soils, it actually removes them completely from the floor.
A simple approach to cleaner, safer floors, this system is perfect for high speed cleaning of hard surface areas, such as entrance ways, hallways, cafeterias, lobbies, warehouses, fitness areas and more. It rivals the performance of an auto scrubber without the added cost or complexity, making it perfect for building service contractors and facility managers alike.
Available in both battery-powered and corded models.
The UniVac system is a compact adaptation of Kaivac’s multi-award winning Dispense-and-Vac system. This one-fill “no-mop” cleaning machine offers a simple approach to cleaner, safer floors in a convenient all-in-one system.
The compact size and extreme maneuverability make it ideal for high-traffic locations with limited storage. Like most Kaivac systems, it is up to 60 times better at removing dirt and pathogens than mopping and significantly faster.
KaiFly combines microfiber technology, a high-quality window squeegee and automatic chemical distribution to quickly remove hazardous bio-pollutants from desks, tables, kitchen tops, walls and virtually any flat surface.
Scientific tests have proven than Kaifly remobes 80 times more contaminants than plain microfiber cloths, making the system very suitable for reducing risks from sicknesses like the Norovirus, MRSA and now the very current Coronavirus Covid-19.
In tests conducted by an independent NELAP accredited laboratory, the KaiFly system removed over 99.9% of the bacteria while cleaning with only plain tap water.
Traditional cleaning methods such as the use of cloths and rags have been shown to spread bacteria over surfaces like desks.
This cross-contamination can cause the last cleaned surface to contain 2 to 8 times more dirt than the first cleaned surface.
KaiFly avoids the risk of cross-contamination and maintains the same effectiveness no matter how many surfaces are cleaned. The ergonomic design ensures that work can be done in half the time and with less stressful on the back and shoulders of the worker.
The worker simply applies the cleaning agent to the surface with the microfiber pad, then squeegees the surface dry, simultaneously removing contaminants and diseases.